Table of Contents
Advertisement
3-8. Changing the authentication method for HDMI
signal input
The external device cannot be authenticated successfully according to your external device and the screen cannot
be displayed. In this case, follow the procedures below to change the authentication method.
Procedure
1. Press
2. Press
The authentication method changes and the monitor power is turned on.
Note
• The current authentication method can be identified based on the color used to display the input port or signal error.
Method
1
(Defaultsetting)
2
3-9. Resetting the Monitor to the Default Settings
There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and Full
Reset for resetting all settings to the defaults.
Attention
• After resetting, you cannot undo the operation.
Note
• Regarding the default setting, see
●
To reset the color adjustments
This function only resets the color adjustments for the currently selected mode to the default settings.
Procedure
1. Choose "Color" in the Setting menu, and press
2. Choose "Color Reset" in the "Color" menu, and press
3. Select "Yes" with
4. Press
.
The color adjustments revert to the default settings.
on the remote control or
on the monitor for five seconds or more.
Input port
"Main Default Settings" (page
or
.
on the monitor to turn OFF the monitor power.
52).
.
.
Signal Error
Chapter3SettingMonitor
31
Advertisement
Table of Contents
