Crestron Isys TPS-3000L Operation Manual page 45

Crestron Isys™ TPS-3000L
Operations Guide – DOC. 6077
6.4" Lectern/Wall Mounted Touchpanel
File Transfer | Send Touchpanel Command
3. As shown after this step, select the NET ID of the TPS-3000L
touchpanel and then click OK. The "Touch Panel Transfer" window
appears (refer to the subsequent graphic).
"Select Network ID" Window
NOTE: When transferring any Cresnet file (touchpanel project/firmware), lower the
port speed baud rate to 38400 to match the Cresnet bus speed when transferring
through a control system.
"Touch Panel Transfer" Window
project, those pages will be deleted from the panel.
Additional choices include Do not send graphic files and Do not send sound files.
These are often very large files that take a long time to load.
6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-3000L • 41
Check Send Direct to Wired Touchpanel if
connected via RS-232 directly to
touchpanel.
Each time a project is
selected using the Browse
command, that project is
added to the File Name
drop-down list. This makes it
convenient to recall projects
without need to browse to a
directory. To delete the list
click Clear History.
All Files in Project: sends
the entire project.
Only Changed Files: sends
only the files that are
different from those that are
currently stored in the panel.
Note that if any pages in the
panel are not present in the