Crestron Isys TPS-3000L Operation Manual page 29

Crestron Isys™ TPS-3000L
Operations Guide – DOC. 6077
6.4" Lectern/Wall Mounted Touchpanel
Configuration Manager is where programmers "build" a Crestron control system by
selecting hardware from the Device Library. In Configuration Manager, drag the
PRO2 from the Control Systems folder of the Device Library and drop it in the upper
pane of the System Views. The PRO2 with its associated communication ports is
displayed in the System Views upper pane.
PRO2 System View
The System Views lower pane displays the PRO2 system tree. This tree can be
expanded to display and configure the communications ports.
Expanded PRO2 System Tree
C2Net-Device Slot in Configuration Manager
To incorporate the TPS-3000L touchpanel into the system, drag the TPS-3000 from
the Touchpanels | Touchpanels (Cresnet) folder of the Device Library and drop it in
the System Views. The PRO2 system tree displays the touchpanel in slot 9 with a
default NET ID of 03 as shown in the following illustration.
NOTE: The first touchpanel in a system is preset with a NET ID of 03, when its
symbol is dragged into the upper pane of System Views. Additional touchpanels are
assigned different NET ID numbers as they are added.
C2Net Device, Slot 9
6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-3000L • 25