Crestron Isys TPS-3000L Operation Manual page 17

Crestron Isys™ TPS-3000L
INTERFACE MENU
AUDIO MENU
Operations Guide – DOC. 6077
6.4" Lectern/Wall Mounted Touchpanel
Interface Menu
The touchpanel communicates with a control system to activate commands or to
display feedback from components within the system. The communication interface
must be correctly specified or communication will not occur. To set communication
parameters select the Interface button located on the SETUP MENU and display the
INTERFACE MENU, shown to the left.
The Cresnet network identity number (CRESNET ID) is displayed on the
INTERFACE MENU. CRESNET ID is the two-digit hexadecimal number. The
hexadecimal number can range from 03 to FE and must correspond to the NET ID
set in the SIMPL Windows program of the Cresnet system. Matching IDs between
touchpanel and SIMPL Windows program is required if data is to be successfully
transferred. NET ID for the TPS-3000L is factory set to 03, and no two devices in
the same system can have the same ID.
Two buttons adjacent to the hexadecimal display, UP and DOWN, increase and
decrease the CRESNET ID by one, respectively.
Select the Return button located on the INTERFACE MENU to accept the changes
and return to the SETUP MENU.
Audio Menu
Audio is a useful feedback tool and it can be used to enhance a custom interface. To
obtain the AUDIO MENU, shown to the left, press the Audio button from the
SETUP MENU. The AUDIO MENU offers a series of buttons, which opens
additional screens and each is detailed in a table after this paragraph. Two of the
buttons on the AUDIO MENU perform a function directly. The Restore Default
Settings button returns all audio parameters to their default factory settings when the
button is selected. After audio parameters have been set, select the Return button to
accept the changes and return to the SETUP MENU.
The button text shown demonstrates the default audio setting for the given button.
The items in parenthesis are also default values, but are seen in subsequent screens.
Audio Setup Details
AUDIO AUDIO
MENU SETUP
BUTTON SCREEN
Master Master
88% Volume
WAV 88% WAV
(On)
(continued on next page)
6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-3000L • 13
DESCRIPTION
The volume of all audio types (WAV, line, and key
click) is affected by the Master Volume control. If the
Master Volume control is set to 100%, the volume for
any type of audio is at maximum. If the Master
Volume is set to 0%, the value of all audio types is
overridden and the touchpanel is silent. If Master
Volume is a percentage (say 50%), then all audio
types can only achieve half their value.
Enable WAV files with the WAV On button. WAV Off
disables this feature. Adjust the volume with the UP
and DOWN buttons. Select the Play WAV File to
sample and adjust the volume as a pre-loaded WAV
file plays.
*