Crestron Isys TPS-3000L Operation Manual page 14

6.4" Lectern/Wall Mounted Touchpanel
10 • 6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-3000L
4. Lift and turn over the pushbutton circuit board to view the cable connecting
the circuit board to the touchpanel. Refer to the following diagram.
Pushbutton Circuit Board (Bottom View)
Screw
Holes
J1
Ribbon Cable
5. Release the tension clip on the ZIF connector (labeled J1) by gently sliding
the clip approximately 1/16" toward the pushbutton circuit board edge and
remove the ribbon cable from the connector. Refer to the pictures after this
step for a detailed view.
NOTE: Do not pull the cable before releasing the tension clip.
Release the Tension Connector: Connector Locked (left) & Unlocked (right)
Crestron Isys™ TPS-3000L
J2
Operations Guide – DOC. 6077