Crestron Isys TPS-3000L Operation Manual page 18

6.4" Lectern/Wall Mounted Touchpanel
Video Screen
14 • 6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-3000L
Audio Setup Details (continued)
AUDIO AUDIO
MENU SETUP
BUTTON SCREEN
Line 88% Line
(On)
All Audio All Audio
(On) Control
Key Click Key Click
Enabled
(Vol. 29%)
Mic AGC AGC
On
Treble & Treble &
Bass Bass
(49%)
*Each screen has its own Return button to revert to the AUDIO MENU. Selected buttons are shown in red
on the touchpanel.
Video Menu
The TPS-3000L can display balanced and unbalanced composite video and S-Video
input supporting both NTSC/PAL formats. Select the Video button from the SETUP
MENU to display the video screen, shown to the left. The video source type can be
specified by selecting Select Input. The touchpanel can be configured to auto-detect
BNC and Twisted-Pair (TP) connections (S-Video or Composite) or can be set to a
specific connection type (BNC S-Video, BNC Composite, TP S-Video, TP
Composite). Select the appropriate input mode.
The Show Controls button on the video screen offers another screen with a series of
buttons, each is detailed in a table after this paragraph. After video parameters have
been set, select the Return button to return to the SETUP MENU.
NOTE: A solid blue screen is displayed in the video window if the video signal is
not detected or is very weak. Verify that the video source is functioning and properly
connected. Balanced video cable runs should not exceed 500 feet (152.4 meters) and
unbalanced video cable runs should not exceed 100 feet (30.5 meters). Cable runs in
excess of these lengths will weaken the video signal.
Video Setup Details
VIDEO
SCREEN
1
BUTTONS
UP button increases video image brightness, DOWN button
Brightness
decreases video image brightness.
Contrast UP button increases video image contrast, DOWN button
decreases video image contrast.
(continued on next page)
Crestron Isys™ TPS-3000L
DESCRIPTION
Enable line level audio with the Line On button. Line
Off disables this feature. Adjust the volume with the
UP and DOWN buttons.
All types of audio may be disabled with a single button
press. All Audio Off activates global muting. All
Audio On enables all audio.
Click On enables the key click sound, Click Off
disables the key click. Adjust the volume with the UP
and DOWN buttons.
The built-in microphone AGC (Automatic Gain Control)
is enabled by the Mic Audio AGC On button and
disabled with the Mic Audio AGC Off button.
Two UP and DOWN buttons allow independent treble
and bass adjustment.
DESCRIPTION
Operations Guide – DOC. 6077
*
2