Crestron Isys TPS-3000L Operation Manual page 30

6.4" Lectern/Wall Mounted Touchpanel
Digital
Analog
Serial
26 • 6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-3000L
Setting the Net ID in Device Settings
Double-click the TPS-3000 icon to open the "Device Settings" window. This
window displays the TPS-3000 device information. If necessary, select the Net ID
tab to change the Net ID, as shown in the following figure.
"Device Settings" Window for the TPS-3000L
NOTE: SIMPL Windows automatically changes NET ID values of a device added
to a program if a duplicate device or a device with the same default NET ID already
exists in the program. Always ensure that the hardware and software settings of the
NET ID match. For NET ID hardware settings details, refer to "Interface Menu" on
page 13.
TPS-3000 Symbol in Programming Manager
Programming Manager is where programmers "program" a Creston control system
by assigning signals to symbols. The following diagram shows the TPS-3000 symbol
in the SIMPL Windows' Programming Manager.
Detail View of the TPS-3000 in SIMPL Windows' Programming Manager
NOTE: Join numbers are expandable to 4000 digital & analog, 999 serial.
Crestron Isys™ TPS-3000L
Operations Guide – DOC. 6077