Table of Contents
Advertisement
Selecting Destinations Directly by Entering Coded Dial
Numbers
You can directly enter the three-digit number (coded dial number) for a destination to send a fax.
You need to register destinations in the coded dial numbers before using this feature.
Registering Destinations in the Address Book(P. 61)
1
Press
and tap <Coded Dial>.
2
Use the numeric keys to enter a three-digit number (001 to 100), then tap <Apply>.
●
If you enter the wrong characters, press
to delete all the input characters at once.)
If a confirmation screen appears
When <Confirm One-Touch/Coded Dial TX> is set to <On>, a screen is displayed that shows the destination
and the name for the number. (For Group Dial, the destination name and the number of destinations are
shown.) Check the contents and if everything is correct, and tap <OK>. If you have difficulty, tap <Cancel> and
re-enter the three-digit coded dial number.
If you want to specify multiple destinations
●
Repeat the following steps. You can specify up to 100 destinations.
Faxing (imageRUNNER 2204F)
. (Press to delete each character one by one; press and hold
Displaying Destinations in Address Book(P. 390)
120
1053-025
Advertisement
Table of Contents
