Table of Contents
Advertisement
Select the type of PBX you are using. If you select <Prefix>, register the prefix code on the next screen.
<Code>
Enter the prefix code using the numeric keys, tap <Pause>, and then tap <Apply>. If you do not insert a
pause, the prefix code is not registered.
TX Function Settings
Specify settings for sending faxes.
Change Default Settings
Specify settings used for sending faxes. The selected settings are used as the default settings when scanning
documents.
Changing Default Settings(P. 132)
Resolution
200 x 100 dpi (Normal)
200 x 200 dpi (Fine)
200 x 200 dpi (Photo)
200 x 400 dpi (Superfine)
Density
Nine Levels
2-Sided Original
Off
Book Type
Calendar Type
Register Unit Name
Register the name of a company or person.
The registered name is sent as sender information to the destination.
<Menu>
of a company or person
ECM TX
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce
errors on received faxes, see
Off
On
●
ECM must be enabled on both the machine and the other fax device because error checks are
performed on both the sending and receiving devices.
●
Even when ECM is enabled, errors may occur due to telephone line conditions.
Setting Menu List
<Fax Settings>
<TX Function Settings>
<Apply>
ECM RX(P. 454) .
TX Terminal ID(P. 452)
<Register Unit Name>
450
Register the name
Advertisement
Table of Contents
