Table of Contents
Advertisement
Setting Up Print Server
With a print server, you can reduce the load on the computer that you print from. The print server also enables each
computer to install MF Drivers over the network, which saves you the trouble of installing the drivers on each
computer by using the DVD-ROM. To set up a computer on the network as a print server, configure the settings for
sharing the printer.
●
To perform the following procedure, log on to your computer with an administrator account.
●
You may be unable to install drivers over the network depending on the operating system and the bit
architecture (32-bit or 64-bit) of the print server and client computers.
●
When implementing a print server in a domain environment, consult your Network Administrator.
To obtain device information when using a print server
Canon Driver Information Assist Service must be added during the printer driver installation.
1
Open the printer folder.
2
Right-click your printer icon and click [Printer properties] (or [Properties]).
3
Click the [Sharing] tab, select [Share this printer], and enter the share name of the
machine.
Network (imageRUNNER 2204F / 2204N / 2004N)
Displaying the Printer Folder(P. 610)
336
1053-057
Advertisement
Table of Contents
