Table of Contents
Advertisement
5
Select the [Use Remote UI Access PIN] check box and set the PIN.
[Use Remote UI Access PIN]
If you select this check box, you must enter a PIN to access the Remote UI.
[Set/Change PIN]
To set a PIN, select the check box and enter a number of up to seven digits both in the [PIN] and [Confirm]
text boxes.
6
Click [OK].
If PIN is forgotten
●
Set a new Remote UI Access PIN in the settings menu on the control panel.
If Remote UI settings are initialized
●
The Remote UI Access PIN is also initialized. After an initialization, reset the PIN.
LINKS
Setting Access Privileges(P. 358)
Setting the System Manager ID (imageRUNNER 2204F / 2204N / 2004N)(P. 359)
Security
370
Remote UI Settings(P. 468)
Initializing Menu(P. 563)
Advertisement
Table of Contents
