Table of Contents
Advertisement
Setting a Wait Time for Connecting to a Network
When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a
mechanism to prevent packets from looping. One effective solution is to define the role of each switch port. However,
communication may still be disrupted for several tens of seconds immediately after you change the way that network
devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for connecting to the
network.
1
Tap <Menu> in the Home Screen.
2
Tap <Network Settings>.
●
If a screen for entering a System Manager ID and PIN is displayed, enter the System Manager ID and PIN, tap
<Apply>, and press
(P. 359)
3
Tap <Waiting Time for Connection at Startup>.
4
Enter the wait time in seconds, and tap <Apply>.
●
Use
/
or the numeric keys to enter the time.
LINKS
Configuring Ethernet Settings(P. 340)
Changing the Maximum Transmission Unit(P. 342)
Network (imageRUNNER 2204F / 2204N / 2004N)
.
Setting the System Manager ID (imageRUNNER 2204F / 2204N / 2004N)
343
1053-05C
Advertisement
Table of Contents
