Table of Contents
Advertisement
The department ID or PIN was changed while the job was being processed.
●
Execute the job again using the new department ID and PIN. If you do not know the PIN, contact the
system administrator.
Receiving of print jobs with unknown IDs and remote scan jobs with unknown IDs is set to <Off>.
●
Action Set <Allow Prnt Jobs w/ Unknown IDs> and <Allow Scan Jobs w/ Unknown IDs> in <Department ID
Management On/Off> to <On>.
#816
The number set in page restriction of Department ID Management has been exceeded, and printing
cannot be performed.
●
Contact your system administrator.
#852
An error occurred because the main power was turned OFF due to an unspecified cause while a job was
being processed.
●
Check that the power cord is securely inserted in the outlet, the power cannot be easily cut, etc., and then
try executing the job again as necessary.
#853
A job could not be executed due to insufficient resources, caused by trying to print a large number of
pages at the same time, etc.
●
Reduce the number of pages or execute the job again when no other jobs are scheduled.
The job could not be executed because it was cancelled from the print driver while print data was being
sent from the computer to the machine.
●
Execute the job again.
#995
A document waiting to be sent was canceled.
●
Send the document again as necessary.
Troubleshooting
501
Advertisement
Table of Contents
