Table of Contents
Advertisement
[Use WSD Printing]
Select the check box to print via WSD. When not using WSD printing, clear the check box.
[Use WSD Browsing]
Select the check box to obtain information about the machine from a computer via WSD. This check box is
automatically selected when the [Use WSD Printing] check box is selected.
[Use WSD Scanning]
Available for Windows Vista/7/8/8.1/10, WSD scanning enables you to scan documents to a computer
without installing the scanner driver. Select the check box to scan documents via WSD. When not using
WSD scanning, clear the check box.
[Use Computer Scanning]
Select the check box to use WSD scanning by operating the machine with the operation panel. This check
box can only be selected when the [Use WSD Scanning] check box is selected. To perform scanning, tap
<Scan> and specify a WSD-connected computer as a scan destination. (
Machine(P. 219) ).
[Use Multicast Discovery]
Select the check box to set the machine to reply to multicast discovery messages. If the check box is
cleared, the machine stays in sleep mode even when multicast discovery messages are flowing on the
network.
3
Click [OK].
Using the operation panel
LPD, RAW, and WSD settings can also be accessed from <Menu> in the Home Screen.
LPD Print Settings(P. 425)
RAW Print Settings(P. 425)
WSD Settings(P. 425)
Setting up WSD network devices on Windows Vista/7/8/8.1/10
The WSD printer and scanner can be added from the printer folder. Open the printer folder (
Printer Folder(P. 610) )
information about how to install MF Drivers for the WSD network printer, see MF Driver Installation Guide.
LINKS
Configuring Printer Ports(P. 333)
Network (imageRUNNER 2204F / 2204N / 2004N)
click [Add a device] or [Add a printer] and follow the on-screen instructions. For more
332
Scanning from the
Displaying the
Advertisement
Table of Contents
