Adjusting The Volume - Canon imageRUNNER 2204F User Manual

Adjusting the Volume

The machine produces sounds in a variety of situations, such as when fax sending is complete or when a paper jam or
error occurs. You can set the volume of each of these sounds individually.
1
Press and tap <Menu>.
2
Tap <Preferences>.
3
Tap <Volume Settings>.
4
Select a setting.
Setting
<Fax Tone> (imageRUNNER 2204F)
<Ring Tone> (imageRUNNER 2204F)
<TX Done Tone> (imageRUNNER 2204F)
<RX Done Tone> (imageRUNNER 2204F)
<Scanning Done Tone> (imageRUNNER
2204F)
<Entry Tone>
<Invalid Entry Tone>
<Warning Tone>
<Job Done Tone>
Basic Operations
Description
Sound produced during a fax transmission
Sound produced when an incoming fax is
received
Sound produced when fax sending is
complete
Sound produced when fax receiving is
complete
Sound produced when fax document
scanning is complete
Confirmation sound each time a key on the
control panel or button on the display is
pressed
Sound produced when an invalid key
operation is performed, such as when you
enter a number outside the valid setting
range
Sound produced when a paper jam or other
error occurs
Sound produced when an operation such as
copying or scanning is complete
70
1053-014
Procedure
● Go to step 5.
● Go to step 5.
● Select <On> (produce a tone) or
<Off> (not produce a tone).