Installing front and rear
turn signal bulb
Replace defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
To prevent contaminants from
being deposited on the new
bulb's glass surface, always use
a clean, dry cloth to hold it.
Install bulb 1 by screwing
clockwise into light housing.
All manuals and user guides at all-guides.com
Insert inside end of lens into
light housing and close.
Install screw 1.
Fairings and Panels
Removing center fairing
panel
Remove seat (
51).
Remove four screws 1 on left
and right and take off center
fairing panel.
7
93
z