Error Codes, Messages, And Solutions - Canon MultiPASS L60 User Manual

Error Codes, Messages, and Solutions

Message
AUTO REDIAL
BUSY/NO SIGNAL
CALLING
CHANGE CARTRIDGE
11-36
Frequently Asked Questions
This table lists the messages that appear in the MultiPASS L60
LCD display and the corresponding error codes that appear in
activity reports, and tells what to do for each.
Error Code
—
#005/018
—
—
Cause
The receiving fax machine
was busy and the
MultiPASS L60 is waiting
to redial.
The telephone number
you dialled is busy.
The other party's fax
machine is not working
properly.
The other party is not
using a G3 fax machine.
The telephone line type
setting on your MultiPASS
L60 is incorrect.
The receiving fax machine
did not answer within 55
seconds.
The MultiPASS L60 is
calling the receiving fax
machine.
The toner cartridge is
empty.
Action
—
Try sending the document
again later.
Contact the other party
and have them check their
fax machine.
Contact the other party
and have them send or
receive the document
using a G3 machine.
Set your MultiPASS L60
for your telephone line
type (tone or pulse).
Contact the other party
and have them check their
fax machine. You can also
try to send the document
manually. For an overseas
call, add pauses to the
registered number.
If you want to cancel the
transmission, press the
STOP button.
Make a copy of a
document. If the printout
is light or blank, replace
the toner cartridge.
Documents received in
memory will then be
printed automatically.
Chapter 11