After Clearing A Paper Jam - Canon MultiPASS L60 User Manual

After Clearing a Paper Jam

After removing the jammed paper, follow these steps:
1. Install the FX-3 toner cartridge back in the unit.
2. Move the paper release lever back to its original position (towards
the front).
3. Close the front cover to reset the unit.
4. Load paper in the multi-purpose tray.
N
If you are experiencing repeated paper jams, it may be due to the
paper you are using:
•
•
Make sure you have removed any scraps of paper from inside the
MultiPASS L60. Not doing so will cause paper to jam again.
Chapter 11
Tap the paper on a flat surface before stacking it in the multi-
purpose tray.
Check that the paper you are using and your printing
environment are within the specifications of the unit. See
Appendix A, "Specifications".
Frequently Asked Questions
11-17