Cancelling Automatic Redialling - Canon MultiPASS L60 User Manual

If the receiving fax machine does not answer on the last attempt, the
MultiPASS L60 displays BUSY/NO SIGNAL.
If this happens, try sending again later.

Cancelling Automatic Redialling

Automatic redialling cannot be cancelled with the STOP button while
the unit is waiting to redial. To cancel do the following steps.
1. Wait until the MultiPASS L60 begins redialling.
2. Press STOP.
3. To cancel the redialling, press
N
You can also delete the document from memory. See "Deleting a
Document Stored in Memory" on page 6-39.
Chapter 6
While the MultiPASS L60 is waiting to redial, the LCD displays
AUTO REDIAL.
The MultiPASS L60 asks you to confirm that you want to cancel:
The MultiPASS L60 beeps and alternates the following displays:
The unit then prints an error report (if set to print one).
BUSY/NO SIGNAL
DIALING
CANCEL?
.
TX/RX CANCELLED
TX/RX NO.
PRINTING REPORT
Sending Faxes
YES #NO
0002
6-27