Resending A Document That Encountered An Error - Canon MultiPASS L60 User Manual

Resending a Document that Encountered an Error

If you get an error signal when sending a document from memory, you
can try resending the document to the same destination without having
to scan it again.
N
Make sure that the ERASE FAILED TX setting in the TX SETTINGS is
set to OFF. See pages 13-8 and 13-9 for details on changing the setting.
1. Press FUNCTION, then MEMORY REF.
Use < < or > > to select MEM. RETRANSMIT.
2.
3. Press START/COPY.
Use < < or > > to select the TX/RX number of the document you want
4.
to resend.
6-40
Sending Faxes
If you are not sure of the TX/RX number of the document you
want to resend, print the list of documents stored in memory.
See page 6-37 for details.
FUNCTION
MEMORY REFERENCE
DELETE DOCUMENT
MEM. RETRANSMIT
TX/RX NO. 0001
TX/RX NO. 0003
Chapter 6