Memory Sending - Canon MultiPASS L60 User Manual

Memory Sending

Memory sending is a quick and easy way to send a fax. The MultiPASS
L60 scans the document into its memory as it dials the fax number. If the
line is free, the MultiPASS L60 begins sending the fax as it scans the rest
of the document.
The MultiPASS L60 has enough memory to store up to 90 pages (fewer
if the document contains many graphics or particularly dense text).
Follow the instructions below to send a document with memory
sending:
N
Be sure to adjust the document feed lever before loading your
document. See page 6-6 for details.
1. Prepare the document and load it, face down, into the Automatic
Document Feeder (ADF).
2. Dial the other party's fax number.
6-20
Sending Faxes
Once the document is loaded, the LCD display shows the
following:
Currently used memory:
If necessary, you can adjust the resolution and contrast. See
page 6-13 for details.
You may not be able to use memory sending if the percentage
shown in the MEMORY USED display is close to 100%. In this
case, use manual sending via the handset to send your
document.
Use one of the dialling methods described on page 6-17.
If you must first dial a digit to get an outside line ("9", for
example), add a pause after that digit by pressing the
REDIAL/PAUSE button, as shown in the example above.
Current resolution:
Standby to scan:
Ex:
MEMORY USED 0%
STANDARD
DOCUMENT READY
TEL=9 5164886700
P
Chapter 6