Setting The Resolution And Contrast; Setting The Scanning Resolution - Canon MultiPASS L60 User Manual

Setting the Resolution and Contrast

Setting the Scanning Resolution

Canon's Ultra High Quality (UHQ
send faxes with a print quality that is very close to that of the original
document. The MultiPASS L60 also lets you adjust the resolution it uses
in sending faxes to best suit your particular document.
The MultiPASS L60 has three resolution settings:
STANDARD resolution (203 98 dpi) is adequate for most text
documents.
FINE resolution (203 196 dpi) is suitable for documents with fine
print (smaller than the print in this sentence).
PHOTO resolution (203 196 dpi, with halftones) is for documents
that contain photographs. With this setting, areas of the document
that contain photos are automatically scanned with 64 levels of grey,
rather than just two (black and white). This gives a much better
reproduction of the photos, though transmission time is longer.
Set the resolution as follows:
1. Press RESOLUTION.
2. Press RESOLUTION until the resolution you want is displayed.
3. Continue with the operation you wish to complete.
Chapter 6
The LCD display shows the current resolution setting.
(FINE resolution with halftone)
If you do not proceed with any other operation, the LCD
display returns to standby mode after about 5 seconds.
) imaging technology enables you to
™
STANDARD
FINE
PHOTO
STANDARD
14:30
Sending Faxes
FaxOnly
6-13