Polling to Receive Faxes
The MultiPASS L60's polling feature allows you to request a document
to be faxed to you from another fax machine. The sender only needs to
make sure the document is on his fax machine and ready to be sent:
when your MultiPASS L60 polls that machine, the document is sent
automatically. The MultiPASS L60 can poll any fax machine that
supports polling. (This process does not work in reverse, however: the
MultiPASS L60 cannot be polled by other fax machines.)
Polling a Fax Machine
To poll another fax machine and receive a document from it, do the
following:
N
Before attempting to poll a fax machine, make sure that fax machine
supports polling.
Your MultiPASS L60 cannot be polled by another fax machine.
1. Lift the handset and dial the fax number of the fax machine you
wish to poll.
2. When you hear a beep, press START/COPY, then hang up.
The MultiPASS L60 begins receiving the fax.
N
If the sender is using a Canon fax machine which has the Polling ID
function, ask him to set the Polling ID of his fax machine to 255 (1111
1111 binary number).
For details on the Polling ID, refer to the sender's fax machine manual.
In all other cases the Polling ID is not a concern.
Chapter 7
Use one of the dialling methods described on page 6-17.
LINE IN USE
TEL=
2 887 0166
7-21
Receiving Faxes