What Happens When Fax/Tel Mode Is Selected - Canon MultiPASS L60 User Manual

What Happens When Fax/Tel Mode is Selected

Type of call
Telephone charges
begin for caller.
RING START TIME
(Factory default
setting = 8 sec.)
F/T RING TIME
(Factory default
setting = 22 sec.)
You can select these options in the RX MODE submenu of the RX
SETTINGS menu when Fax/Tel Mode is selected. See below for details
on changing the settings.
N
You can also set these options from the MultiPASS Desktop Manager.
See the MultiPASS Desktop Manager User's Guide for details.
*In Australia, the fax plays "You are connected. Please hold." after answering.
7-6
Receiving Faxes
Telephone
MultiPASS L60 answers without ringing*
MultiPASS L60 listens for FAX TONE
(For 8 sec.)
FAX TONE is not detected
MultiPASS L60 starts ringing
If you don't pick up the handset
(within 22 sec.)
F/T SW ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT
RECEIVE
(Factory default setting)
Not all fax machines are capable of sending a FAX
TONE. For those cases if you set the F/T SW
ACTION to RECEIVE, the MultiPASS L60
switches to receive mode automatically and starts
receiving the document. If no document comes in,
it disconnects after approximately 35 seconds.
Fax
Sending document
manually
FAX TONE
detected
Fax
Sending document
automatically
Document received
automatically .
(FAX TONE is detected
and the MultiPASS
L60 switches to
receive mode.)
Pick up the
handset to talk.
DISCONNECT
MultiPASS L60
disconnects the call.
Chapter 7