Guidelines For Entering Information Via The Operation Panel - Canon MultiPASS L60 User Manual

Guidelines for Entering Information Via the
Operation Panel
The following section explains how to enter user information into the
MultiPASS L60 via the operation panel.
N
If you pause while entering information and do not make an entry
for more than 60 seconds, the MultiPASS L60 returns to standby
mode and loses all information you had entered up to that point.
You will then have to start again.
If the MultiPASS L60 rings while you are entering information,
press the STOP button and lift the handset: The MultiPASS L60 will
automatically save all the information you have entered up to the
last time you pressed the START/COPY button.
•
•
•
Chapter 3
If you hear nothing or a slow beep, someone is trying to send a
fax: press the START/COPY button.
If you hear a voice, you are receiving a normal telephone call.
If your MultiPASS L60 is set to receive faxes automatically, you
do not have to press the STOP button. The MultiPASS L60 will
automatically receive the fax. See Chapter 7 "Receiving Faxes".
Registering Information in the MultiPASS L60
3-3