Replace Light Bulbs - Skoda ENYAQ iV 2020 Owner's Manual

80 Lighting, windscreen wipers and washers ›
Operation
Switching on
›
Push the lever in the direction of
the arrow.
It lights up in the instrument clus-
ter
When the assist system switches
the main beam on automatically, it
lights up in the instrument cluster
from the isolation box.
Switching off
›
Manually switch the high beam on or off.
Function restriction
The system may dazzle other road users if their headlights/lights
are not detected for the following reasons, for example:
The headlights/lights of oncoming vehicles are covered by
▶
crash barriers, for example.
The headlamps/lights of the oncoming or preceding vehicle
▶
are dirty or not functioning. The system can also recognize a
vehicle as a single-lane means of transport.
Settings
Activation/deactivation
›
In the Infotainment system, select the menu
side .

Replace light bulbs

from the isolation box.
Out-
›
By moving your finger sideways, choose the screen with the
menu item Headlights .
›
Select Headlights and actiavte or deactivate the function Dynamic
Light Assist .
Replace light bulbs
What you should be mindful of
DIY replacement of the following bulbs is possible. Have the re-
maining light sources replaced by a specialist garage.
The new bulb must conform to the specification of the original
light bulb. The name of the bulb is marked on the bulb socket.
NOTICE
Danger of headlight damage due to the ingress of water and dirt!
Always fit the protective cap on the headlight correctly after
▶
changing a bulb.
Conditions for changing a bulb
✓ Ignition off
✓ Light switched off