Skoda ENYAQ iV 2020 Owner's Manual page 202

Table of Contents

Advertisement

200 High-voltage system ›
Charging of high-voltage battery
tery may only be reached after several charges. This is due to
technical reasons and does not constitute a malfunction.
NOTICE
Danger of irreversible damage to the high-voltage battery.
If the vehicle is not used for a long period of time, charge the
high-voltage battery after a maximum of four months.
Setting the charging process
Adjustments to applications
The following applications can be used, for example, to set the
delayed charge (departure time) or the lower battery charge lim-
it:
Charging process
» page 202, Overview
ŠKODA Connect application
» page 151, Functionality
Prerequisites for starting time-delayed charging
✓ The vehicle is connected to a charger that supports time-de-
layed charging.
✓ Time-delayed charging is activated in the application set-
ting.» page 202,
Overview.
If, after the vehicle has been connected to the charger, the
state of charge is lower than the set lower battery charge limit,
the high-voltage battery is charged immediately to the set
charge limit.
Troubleshooting
Low state of charge of the high-voltage battery
illuminates
The high-voltage battery is charging.
Charging does not start or is cancelled
A message indicating that no charging is possible is displayed.
Disconnect the charging cable from the vehicle and plug it in
again.
Or:
Use another charging option.
If the charging process does not start or is interrupted again,
seek the help of a specialist garage.
The charging process does not start, the state of charge does
not increase
The charging indicator on the charging socket illuminates or pul-
sates green.
Check whether the set upper battery charge limit has not yet
been reached the charging process in the main screen for the
charging process setting in the infotainment
view.
Set a new upper limit and start the charging process again.
Or:
The charging indicator on the charging socket blinks green.
Check whether the delayed charging function is not ac-
tive
» page 203, Setting the charging
Deactivate the function if the charging process should start
immediately.
Or:
The charging indicator on the charging socket illuminates white.
The loading process was ended manually.
» page 202, Over-
points.

Advertisement

Table of Contents
loading

Table of Contents