Table of Contents
Advertisement
74
Lighting, windscreen wipers and washers ›
namic cornering light function ensures the best possible illumi-
nation of the curve area.
When no light is switched on
The control light
may also light up in the instrument cluster,
indicating that it is necessary to switch on the light.
illuminates
›
Switch on the light.
Operation
Light modes
The light mode can be selected us-
ing the switch
›
Press the
select the desired mode.
The information of selected mode is
briefly displayed in the instrument
cluster display.
The menu with available light modes
varies depending on the given light-
ing conditions and the vehicle opera-
tion (standstill/drive).
- Automatic mode
▶
Automatic switching on/off of dipped, parking or daytime run-
ning lights.
In the light switch, is illuminated
is automatically turned on, the switch also lights up
- Dipped beam
▶
Exterior lighting
▶
▶
ly set.
only possible when the vehicle is stationary or driving at a speed
.
of max. 10 km/h up to a distance of max. 100 m. When one of
the values is exceeded, automatic driving light switching takes
switch repeatedly and
place.
High beam and headlight flasher
The high beam works when the low beam is on.
. Even if the dipped beam
Risk of an accident!
.
▶
Turning on the dipped beam.
In the light switch, is illuminated
- Sidelights
Switching on the sidelights.
In the light switch, is illuminated
- Light turned off
Turn off the light.
There is no green warning light in the light switch.
After switching on the ignition, the
Switching on the parking light and switching off the light is
Switch on high beam
A
Switch off main beam / switch
B
on headlight flasher
When the main beam or headlight
flasher is switched on, the indicator
lamp lights up in the instrument
cluster
CAUTION
Do not dazzle other road users with the high beam.
.
.
mode is automatical-
.
Advertisement
Table of Contents
