Table of Contents
Advertisement
254 Roof rack and hitch ›
Swivelling hitch
›
Pull on the switch. The tow bar is
unlocked. The indicator light
side the switch illuminates.
›
Swing in the tow bar under the
bumper until it audibly clicks into
place.
Check latchings: the indicator
light
Coupling or uncoupling a trailer or accessory
The following information describes the procedure for coupling
and uncoupling a trailer. The information also refers to another
accessory, e.g. a bike carrier.
WARNING
Risk of an accident!
Do not use the safety eye for towing.
▶
Distribute and fix the load correctly.
▶
in-
within the switch lights up.
The trailer has a 13-pin electrical socket. If the trailer has a 7-
pin connector, use a corresponding adapter from the ŠKODA
Original Accessories.
Coupling
›
Swing out the tow bar.
›
Put the trailer drawbar onto the ball head.
›
Plug the electrical trailer plug into
the socket
›
Hook the tear-off rope of the trail-
er onto the safety eye
tear-off rope must sag against the
vehicle in all trailer positions.
Uncoupling
Uncoupling takes place in reverse order.
Power supply of the trailer power network
In the electrical connection between the vehicle and trailer, the
trailer is powered by the vehicle.
NOTICE
Risk of damage to the vehicle electronics!
The total power consumption of all consumers connected to the
trailer power supply must not exceed 350 watts.
.
A
. The
B
Advertisement
Table of Contents
