Table of Contents
Advertisement
›
To restart the charging process, tap the functional surface
again to immediately start the charging process in the infotain-
ment
» page
202.
End the charging process
›
Press the
button on the key.
The charging process is interrupted, the charging plug is un-
locked for 30 s and can be removed.
The charging plug is locked again after 30 s. If the upper bat-
tery charge limit has not been reached, charging will continue.
Or:
›
To end the charging process at the charging station, follow the
instructions on the charging station.
The charging plug remains locked in the charging socket and
must be unlocked by pressing the
After reaching the upper charging limit, the charging process
is automatically ended. If the option to automatically release the
charging cable connector is selected,
locked and remains unlocked. Otherwise it remains locked and
must be unlocked by pressing the
Charging with direct current (DC)
End the charging process
›
To end the charging process at the charging station, follow the
instructions on the charging station.
When the charging process is complete, the charging plug is
automatically unlocked.
Or:
button on the key.
» page
202, the plug is un-
button the key.
High-voltage system ›
Charging of high-voltage battery
›
Tap the functional surface for immediate termination of the
charging process in the menu for the charging process setting
in the infotainment
» page
202.
The charging process is ended. The charging plug remains
locked in the charging socket and must be unlocked by press-
ing the
button on the key.
In order to start the charging process again, the charging plug
must be removed and the charging process then started com-
pletely from the beginning.
After reaching the upper charging limit, the charging process
is automatically ended. The charging plug is unlocked in the
charging socket and can be removed.
After the charging process
›
If the charging plug is not automatically unlocked or locked
again after the charging process has been completed, it can be
unlocked with the
button on the key.
›
Disconnect the charging plug from the charging socket.
›
Attach the protective cap to the charging socket.
›
Close the battery flap.
›
Where necessary, disconnect the charging cable from the
charger or from the mains socket.
If you leave the charging cable connected after charging us-
ing alternating current (AC), the high-voltage battery will not be
discharged by electrical consumers in the vehicle. These con-
sumers are powered by the charger.
Initial charging and charging for longer service life
If the high-voltage battery is new or has not been charged for a
long time, the maximum state of charge of the high-voltage bat-
199
Advertisement
Table of Contents
