Skoda ENYAQ iV 2020 Owner's Manual page 55

Stop position change
›
With the ignition off and the driver's door open, press any but-
ton on the seat to be adjusted.
Or:
›
Press the button on the key.
›
In other cases, release the held memory button.
Settings
Storing driver's seat and exterior mirror position for driving
forwards
›
Turn on the ignition.
›
Adjust the seat and the exterior
mirrors.
›
Press the button
seconds one of the memory but-
tons
The seat position can be stored if the angle of inclination of
the seat back relative to the seat surface is less than approxi-
mately 110° and the seat is not in any of the end positions.
Save front passenger seat position
Storing the passenger seat position is analogous to storing the
driver's seat position.
Seats, steering wheel and mirror ›
and within 10
A
.
B
Storing front passenger´s exterior mirror position for revers-
ing
›
Turn on the ignition.
›
In the Infotainment system, select the menu
side .
›
By moving your finger sideways, choose the screen with the
menu item Mirror .
›
Select Mirror and activate the mirror's fold function.
›
Turn the exterior mirror knob to the position .
›
Engage reverse gear.
›
Adjust the mirror to the desired position.
›
Disengage reverse gear.
The set mirror position is saved.
When changing the stored seat and exterior mirror position
for forward driving, the passenger exterior mirror position for
reverse driving must be restored.
Memory function of the seat
Out-
53