Traffic Sign Recognition - Skoda ENYAQ iV 2020 Owner's Manual

Settings
In Infotainment
In the menu .
Troubleshooting
Message regarding system unavailability
›
Switch the ignition off and on again.
›
If the system is still not available, seek the help of a specialist
garage.

Traffic sign recognition

Usage
The road sign recognition shows road signs in the display of the
instrument cluster. This also indicates exceeding the speed limit.
WARNING
Road signs on the road always have priority over the road signs
shown on the display.
Functionality
Displayed road signs
Speed limits
▶
Overtaking prohibited
▶
Driving bans – one-way traffic
▶
Danger sign
▶
Additional characters, e.g. speed limit in wet conditions
▶
Driver assist systems ›
Towing a trailer
If a trailer or other accessory is connected to the trailer socket,
trailer-relevant road signs are also displayed.
Driving on roads without speed limits
If you are on a road with no speed limits, the road signs
appear in the display.
Example of road sign display
Example of additional characters
Example of several simultaneously recognised road
signs.
At the same time, a red display regarding the speed limit ap-
pears in the speedometer.
Speed units
The speed indications in the road signs shown refer to the speed
units that are common in the country.
For example, the display may refer to 30 km/h or 30 mph de-
pending on the country.
Restriction
The system function may be restricted in the following cases:
The sensor is blinded by the sun or oncoming traffic.
▶
Traffic sign recognition 181
will