Skoda ENYAQ iV 2020 Owner's Manual page 128

126 Mobile device management ›
Due to the variety of applications, as well as their ongoing devel-
opment, the available applications may not function on all mobile
devices. ŠKODA AUTO assumes no liability for their proper
functioning.
The scope of available applications and their functionality is de-
pendent on the type of Infotainment, as well as the vehicle and
country.
Information about ŠKODAapplications
Detailed information about ŠKODA applications can be found on
the website after reading the following QR code or link:
http://go.skoda.eu/mobile-apps
Connection set-up
Connect a mobile device to Infotainment
›
Find available Bluetooth® devices in the mobile device.
›
Select the Infotainment Bluetooth® unit.
The name of the unit can be found by tapping
devices Device name: determine.
›
Confirm the PIN; enter it if necessary and then confirm.
Connect Infotainment to a non-paired mobile device
›
Mobile devices .
›
Select the desired device from the list of available devices.
›
Select the desired Bluetooth® profile.
›
Confirm the PIN; enter it if necessary and then confirm.
Mobile device management
mobile
›
If two devices are connected to the Infotainment, select the
device to be replaced.
Connect Infotainment to a previously connected mobile de-
vice
›
Mobile devices .
›
Select the desired device from the list of known devices.
›
Select the desired Bluetooth® profile.
›
If two devices are connected to the Infotainment, select the
device to be replaced.
SmartLink connection
Infotainment provides the ability to connect SmartLink to com-
patible mobile devices using the following connection types:
Android Auto
Apple CarPlay
MirrorLink
Mobile devices can be connected to the Infotainment via USB
cable or Wi-Fi, as long as the mobile device supports it.
›
Connect the mobile device to the Infotainment via a USB cable
or browse and connect to a wireless network.
›
Tap the icon of the supported connection.