About 30 seconds after starting (
▶
cluster)
When driving around a sharp bend
▶
During an ESC intervention
▶
Settings
Automatic activation
Front Assist is automatically activated when the ignition is
switched on.
Activation / deactivation and setting in Infotainment
In the menu
.
◼
▶
Active - Activation/deactivation of the Front Assist
Advance warning - Activation/deactivation and setting the dis-
▶
tance level at which a warning occurs
▶
Display distance warning - Activation/deactivation of distance warn-
ing
▶
Swerve support - if the function is activated, the system can help
avoid an obstacle by a braking and steering intervention
▶
Cornering brake function - when the function is activated, the system
can slow down the vehicle when turning at low speeds to
avoid a collision with the oncoming vehicle
Show system deactivation in the display of the instrument
cluster
illuminates
Deactivate Front Assist when handling the vehicle on a truck,
a car ferry etc.
lights up in the instrument
Driver assist systems ›
Troubleshooting
Front Assist is not available
illuminates together with
›
Clean the front radar sensor.
›
Switch the ignition off and on again.
›
If Front Assist is still unavailable, check the brake lights on the
vehicle or on the attached trailer.
›
If the brake lights are working and Front Assist is still unavaila-
ble, seek the help of a specialist garage.
There was an unfounded warning or system intervention
›
Clean the front radar sensor.
›
If the system is not working properly, disable Front Assist and
seek the help of a specialist garage.
Pedestrian detection system
Functionality
Pedestrian recognition helps to prevent a collision with crossing
or lengthwise moving pedestrians by enabling automatic braking
interventions.
Status display in the instrument cluster display
lights up - Danger of collision
Risk of collision in a speed range of 5-30 km/h
The system triggers automatic braking.
Pedestrian detection system
169