Status Messages When Configuration Is Running Normally - IBM E Server i Series Manual

Status messages when configuration is running normally

The following status messages assist you in identifying whether or not you have
connection problems.
These status messages indicate that you do not have connection problems:
98
iSeries: iSeries Access for Windows Operations Console
Status messages when configuration is running normally
Status messages that indicate you do not have connection problems.
Status messages when you have connection problems
Status messages that indicate you have connections problems.
Connecting
This appears at the remote console during an initial connection to the local
console.
Connecting console or Connecting remote control panel
This status message is the normal status while the console is making the
initial connection to an iSeries server. If it shows for more than a couple of
minutes, see Connecting console in the list of status messages that indicate
connection problems.
Pending authorization
This appears during an initial connection to an iSeries server when the
Service Device sign-on window appears. This status remains until a first user
(either at an local console or remote console) signs on successfully. After the
user signs on successfully, the sign-on window and this status will not appear
to other dial-in users as long as the local console remains connected to the
server. A local console over a network (LAN) will always post the Service
Device Sign-on window the first time a connection is made. Subsequent
connections to the same server will not re-prompt the user.
Connected
This appears at the local console after an initial connection to the iSeries
server is completed (the user signed on successfully to Operations Console).
This status also appears at the remote console when a connection to the local
console is completed.
Disconnecting
This appears at the local console when the local console user disconnects
from an iSeries server and the PC is disconnecting the connection. This status
would appear at the remote console when the remote console user
disconnects from the local console and the PC is disconnecting the
connection.
Disconnected
This appears at the local console after the local console user disconnected
from an iSeries server and the PC is no longer communicating with the
server.
Not connected to local console
This appears at the remote console when the PC is not connected to the local
console.