Create And Configure Incoming Connections - IBM E Server i Series Manual

2. Select Settings.
3. Select Control Panel.
4. Select Network and Dial-up Connections.
Note: If Incoming Connections does not exist, you have to install it. For more
information, see Create and configure incoming connections.
5. Click Incoming Connections.
6. Click the Users tab
7. In the Users allowed to connect field, select the check box next to the user ID
for which you want to grant remote access.
Grant remote access for Windows XP
To grant remote access using Windows XP Incoming Connections Properties:
1. Click Start.
2. Select Settings.
3. Select Control Panel.
4. Select Network and Dial-up Connections.
Note: If Incoming Connections does not exist, you have to install it. For more
information, see Create and configure incoming connections.
5. Click Incoming Connection Properties.
6. In the Users allowed to connect field, select the check box next to the user ID
for which you want to grant remote access.

Create and configure incoming connections

You need to create and configure Incoming Connections:
Create and configure incoming connections for Windows 2000
Use these instructions to create and configure Incoming Connections for
Windows 2000.
Create and configure incoming connections for Windows XP
Use these instructions to create and configure incoming connections for
Windows XP.
Create and configure incoming connections for Windows 2000
Complete the following steps to create and configure incoming connections for
Windows 2000.
1. Click Start —>Settings —> Control Panel.
2. Select Network and Dial-up Connections.
3. Click Make New Connection. The Welcome to the Network Connection
Wizard window appears.
4. Click Next.
5. Click Accept incoming connections. Then, click Next.
6. Select the check box for the PC modem that is going to receive the calls from
the remote console.
Make sure that the Operations Console Connection check box is not selected.
If other check boxes are selected, do not change them.
Then, click Next.
7. Click Do not allow virtual private connections.
Chapter 4. Set up Operations Console
65