IBM E Server i Series Manual page 67

AT&FE0M0X2$BA1&W0$MB9600S0=0
AT - ATTENTION
&F - LOAD FACTORY SET (SWITCH SET TO SYNC)
E0 - DISABLE ECHO
M0 - DISABLE SPEAKER
X2 - CHECK FOR DIAL TONE BEFORE DIALING
$BA1&W0 - TURN OFF SPEED CONVERSION
$MB9600 - CONNECT AT 9600 ONLY
S0 = 0 SPECIFIES NO AUTO ANSWER
Initialization string for 7855: For the 7855-10 modem, the initialization string for the
iSeries system is:
AT&F1&C1E0M0V1X4&S1S0=2\R2\Q2
AT - ATTENTION
&F1 - LOAD FACTORY ASYNC SETTINGS
&C1 - CD ON ONLY WHEN CONNECTED
E0 - DISABLE ECHO
M0 - DISABLE SPEAKER
V1 - RESULT CODES ARE WORDS
X4 - DETECT DIAL TONE AND BUSY
&S1 - DSR FOLLOWS CD
S0 = 2 SPECIFIES ANSWER ON SECOND RING
\R2 - DTE USES RTS
\Q2 - MODEM USES RFS
For the 7855-10 modem, the initialization string for the PC is:
AT&F1&C1E0M0V1X4S0=0\R2\Q2
AT - ATTENTION
&F1 - LOAD FACTORY ASYNC SETTINGS
&C1 - CD ON ONLY WHEN CONNECTED
E0 - DISABLE ECHO
M0 - DISABLE SPEAKER
V1 - RESULT CODES ARE WORDS
X4 - DETECT DIAL TONE AND BUSY
S0 = 0 SPECIFIES NO AUTO ANSWER
\R2 - DTE USES RTS
\Q2 - MODEM USES RFS
Initialization string for 7857: For the 7857-017 modem, the initialization string for
the iSeries system is:
AT&F0&C1E0M0V1X2S0=2&K2&U4&D2*I8
AT - ATTENTION
&F0 - LOAD FACTORY ASYNC SETTINGS
&C1 - DSR&CD IN NORMAL MODE
E0 - DISABLE ECHO
M0 - DISABLE SPEAKER
V1 - RESULT CODES ARE WORDS
S0 = 2 ANSWER ON SECOND RING
&D2 - RETURN MODEM TO COMMAND MODE WHEN THE LINE DROPS
*I8 - USE 9600 BPS DTE ONLY (important for internal port speed)
For the 7857-017 modem, the initialization string for the PC is:
AT&F0&C1E0M0V1X2S0=0&K2&U4&D2F8*I8&E2
AT - ATTENTION
&F0 - LOAD FACTORY ASYNC SETTINGS
&C1 - DSR&CD IN NORMAL MODE
E0 - DISABLE ECHO
M0 - DISABLE SPEAKER
V1 - RESULT CODES ARE WORDS
S0 = 0 NO AUTO ANSWER
&K2 - USE CTS(C106) DTE FLOW CONTROL
&U4 - USE RTS(C105) DATA FLOW CONTROL
61
Chapter 4. Set up Operations Console