IBM E Server i Series Manual page 52

Table 1. Operations Console cards and cables
Table 2. Remote control panel cables
This table lists the card location for each model. You need a card if you are
configuring a local console on a network.
Table 3. Card location
46
iSeries: iSeries Access for Windows Operations Console
Server
9406 640/650/730/740/S30/S40
9406 600/620/720/S10/S20
9401 150
9406 270/830/840
9406 810/820/825/870/890
Server
9406 640/650/S30/S40
9406 270/820/830/840 (1)
All other systems
Notes:
1. Currently, these servers support the remote control panel only under Windows NT
Workstation 4.0 or Windows 2000 Professional, and Windows XP Professional.
2. The connector with the missing pin goes on the server side.
3. The parallel remote control panel cable is no longer marketed. An alternative to the
remote control panel is the virtual control panel. For more information on your options,
see Control panels. The table has been included in case you are currently using remote
control panel cables.
Model
170/250
270
620/S20/600/S10
720
810
820
825
830/SB2
840/SB3
870/890
Note: (1)These locations will only be available if the Integrated Ethernet Port is not
operational.
Feature code (card)
2699
2721 or 2745
2721, 2742, 2745, 2771,
2793
Part number (cable)
97H7584
04N5592 (2) (3)
97H7591
Operations Console async
card location for the cable
C08
C07
C09
C09
C07
C06
C06
C02
C02
C02
Part number (cable)
97H7556
97H7557
97H7557
Local console on a network
C06, second C05
C06, C05
C04, second C03, third C11
Integrated Ethernet Port,
C03, C02, C01 (1)
C04, second C06, third C10
C04, second C06, third C10
C04, C06, C07, C08, C09, C10