The Gear Box Assembly - Toro Greensmaster e1021 Service Manual

The Gear Box Assembly

g287374
1. Gear box assembly
2. Drive shield
3. Cotter pin
Removing the Gear Box Assembly
Universal Groomer (Optional): Service and Repairs
4. Clevis pin
5. Input shaft
6. Shim
The groomer gear box assembly is located on the opposite side of the cutting
unit from the reel drive.
1. Remove the groomer reel assembly; refer to
(page 8–14).
2. Safely prevent the reel from rotating by blocking the cutting reel with a piece
of wood near one of the reel spiders.
The groomer gear box for this machine is installed on the left side of
the cutting unit. Groomer gear boxes installed on the left side of the
cutting unit use a left hand thread. Turn the input shaft clockwise
to remove the gear box.
Figure 115
IMPORTANT
Page 8–4
7. Adapter
Removing the Groomer Reel
Greensmaster
20246SL Rev A
® e1021/e1026