Toro Greensmaster e1021 Service Manual page 129

Removing and Installing Lithium-Ion Battery Controller (BMS) (continued)
Greensmaster ® e1021/e1026
20246SL Rev A
Pay close attention to the lithium-ion battery controller orientation
during installation. Ensure that the lithium-ion battery controller is
installed in the proper orientation prior to connecting any cables.
Failure to do so may result in personal injury and property damage.
9. Install the lithium-ion battery controller in reverse order. Install the controller
with the positive (+) terminals upward; refer to
10. Tighten the power supply and battery cable fasteners from 9 to 10 N·m (80
to 90 in-lb), then apply battery terminal protector Toro Part No. 107-0392
or a light layer of grease to the battery terminals and cable connectors to
reduce corrosion.
CAUTION
Page 5–49
Figure 70 and Figure 72.
Electrical System: Service and Repairs