Toro Greensmaster e1021 Service Manual page 56

Assembling the Reel Drive Assembly (continued)
g258764
1. Press flush
Installing the Reel Drive Assembly
Traction and Reel Drive Systems: Service and Repairs
19. Install the bolt (28), washer (27) and nut (25) to the idler arm (26) and reel
drive housing (22). Do not tighten the bolt (28).
20. If removed, install the expansion plug (13) to the reel drive cover (14) and
press flush to outer surface (refer to
21. Install the reel drive belt; refer to
22. Adjust the reel drive belt tension; refer to
4–3).
Note: Refer to Figure 14
1. Place the V-ring seal (5) into the reel drive assembly (6).
2. Install telescopic coupler (8) to the reel drive shaft.
3. Install the reel drive assembly (6), washers (3), spring washer (4) and spacers
(2 and 11) to the RH side plate (9) and secure the reel drive assembly (6)
with 2 screws (1) and nut (7).
4. Slide the telescopic coupler (8) to the transmission gear shaft (10).
5. Connect the battery pack; refer to
(page 5–3).
Figure 16
Figure
Installing the Reel Drive Belt (page
Adjusting the Reel Drive Belt (page
during this procedure.
Connecting the Lithium Battery Pack
Page 4–10
16) of the reel drive cover.
Greensmaster ®
20246SL Rev A
4–6).
e1021/e1026