Toro Greensmaster e1021 Service Manual page 71

Disassembling the Transmission Gear Box Assembly (continued)
Greensmaster ® e1021/e1026
20246SL Rev A
9. If necessary, disassemble the differential assembly (14); refer to
Disassembling the Differential Assembly (page
10. Remove the bolt (25) that secures the cable brake lever (24) onto the brake
lever (19). Slide and remove the cable brake lever (24) and external retaining
ring (1) from the brake lever (19).
11. Remove the 2 bolts (8) that secures the retainer plate pin (15) and brake
plate retainer (16) to the transmission housing assembly (23). Remove the
retainer plate (15) from the transmission housing assembly (23).
12. Slide and remove the brake lever assembly (19) from the transmission
housing assembly (23). Remove the flat wire spring (22) from the
transmission housing assembly (23).
13. Disassemble the brake lever assembly (19) as follows:
A. Remove the retaining ring (17) from the brake clevis pin (21).
B. Slide and remove the brake clevis pin (21) from the brake band (18)
and brake lever (19).
C. Remove the brake lever (19) from the brake band (18).
D. Remove and discard the O-ring (20) from the brake lever (19).
Page 4–25 Traction and Reel Drive Systems: Service and Repairs
4–33).