Toyota LAND CRUISER PRADO Owner's Manual page 759

758
8-2. Steps to take in an emergency
Slightly loosen the wheel nuts
3
(one turn).
Assembling the jack handle.
4
Remove the jack handle, jack handle extension bar and jack handle
bar from the tool box and assemble by following these steps.
Loosen the bolt and the
1
screw using either the jack
handle end or a screwdriver.
Assemble the jack handle
2
extension bar and the jack
handle bar and tighten the
bolts.
Check that the bolts are firmly
tightened.
Assemble the jack handle
3
extension bar and the jack
handle and tighten the screw.
Check that the screw is firmly
tightened.
LC150_OM_OM60R93E_(GE)