Toyota LAND CRUISER PRADO Owner's Manual page 528

Changing the passkey
Select "Passkey" using the tune/scroll knob. (P. 521)
1
Select a 4 to 8-digit passkey using the knob.
2
Input the number 1 digit at a time.
When the entire number to be registered as a passkey has been
3
input, press
If the passkey to be registered has 8 digits, pressing
necessary.
Setting automatic connection of the device on or off
If "BT Power" is set to on, the registered device will be connected
automatically when the engine switch is turned to the "ACC" position
(vehicles without a smart entry & start system) or ACCESSORY mode
(vehicles with a smart entry & start system).
Select "BT Power" using the tune/scroll knob. (P. 521)
1
Select "ON" or "OFF" using the knob.
2
Displaying the device status
Select "Bluetooth
● Displaying the device name
Select "Device name" using the tune/scroll knob.
● Displaying the device address
Select "Device address" using the tune/scroll knob.
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Setting the automatic connection confirmation display to on or off
If the "Display setting" is set to on, the portable player connection sta-
tus will be displayed when the engine switch is turned to the "ACC" or
"ON" position (vehicles without a smart entry & start system) or
ACCESSORY or IGNITION ON mode (vehicles with a smart entry &
start system).
Select "Display setting" using the tune/scroll knob. (P. 521)
1
Select "ON" or "OFF" using the knob.
2
LC150_OM_OM60R93E_(GE)
(ENTER).
*
info" using the tune/scroll knob. (P. 521)
5-7. "SETUP" menu
(ENTER) is not
527
5