The Rear Cross Traffic Alert Function - Toyota LAND CRUISER PRADO Owner's Manual

Hide thumbs Also See for LAND CRUISER PRADO:
Table of Contents

Advertisement

Instances of the Blind Spot Monitor function unnecessarily detecting a vehi-
cle and/ or object may increase under the following conditions:
• When there is only a short distance between your vehicle and a guardrail,
wall etc.
• When there is only a short distance between your vehicle and a following
vehicle
• When vehicle lanes are narrow and a vehicle driving 2 lanes across from
your vehicle enters the detection area
• When items such as a bicycle carrier are installed on the rear of the vehi-
cle
The Rear Cross Traffic Alert function (if equipped)
The Rear Cross Traffic Alert functions when your vehicle is in reverse.
It can detect other vehicles approaching from the right or left rear of
the vehicle. It uses radar sensors to alert the driver of the other vehi-
cle's existence through flashing the outside rear view mirror indicators
and sounding a buzzer.
Approaching vehicles
1
WARNING
Cautions regarding the use of the system
The driver is solely responsible for safe driving. Always drive safely, taking
care to observe your surroundings.
The Rear Cross Traffic Alert function is only an assist and is not a replace-
ment for careful driving. Driver must be careful when backing up, even
when using Rear Cross Traffic Alert function. The driver's own visual confir-
mation of behind you and your vehicle is necessary and be sure there are
no pedestrians, other vehicles etc. before backing up. Failure to do so could
cause death or serious injury.
According to conditions, the system may not function correctly. Therefore
the driver's own visual confirmation of safety is necessary.
LC150_OM_OM60R93E_(GE)
4-5. Using the driving support systems
Detection areas
2
469
4

Advertisement

Table of Contents
loading

Table of Contents