Toyota LAND CRUISER PRADO Owner's Manual page 413

412
4-5. Using the driving support systems
Setting up Toyota parking assist-sensor (vehicles with a naviga-
tion system or multimedia system)
You can change the buzzer sound volume and the screen operating
conditions.
Vehicles with navigation system

Press the "MENU"/"APPS" button.
1
Select "Edit/settings"/"Setup", and then "System" (on some models)
2
on the screen.
Select "Vehicle settings/Vehicle" on the screen.
3
Select "TOYOTA Park Assist Settings" on the screen.
4
Select the desired item.
5
Vehicles with multimedia system

Press the "MENU"/"APPS"/"SETUP" button.
1
Select the "Setup" on the screen (on some models).
2
Select "Vehicle", and then "TOYOTA park assist settings" on the
3
screen.
Select the desired item.
4
● The buzzer sound volume can be adjusted.
● On or off can be selected for Toyota parking assist-sensor display.
● Front or rear center sensors display and tone indication can be set.
■ The Toyota parking assist-sensor can be operated when
Front corner sensors:
●
• The engine switch is in the "ON" position (vehicles without a smart entry
& start system) or the engine switch is turned to IGNITION ON mode
(vehicles with a smart entry & start system).
• The shift lever is in a position other than P.
• The vehicle speed is less than approximately 10 km/h (6 mph).
(At any speed when the shift lever is in R)
Front center sensors:
●
• The engine switch is in the "ON" position (vehicles without a smart entry
& start system) or the engine switch is turned to IGNITION ON mode
(vehicles with a smart entry & start system).
• The shift lever is in a position other than P or R.
• The vehicle speed is less than about 10 km/h (6 mph).
Rear corner and rear center sensors:
●
• The engine switch is in the "ON" position (vehicles without a smart entry
& start system) or the engine switch is turned to IGNITION ON mode
(vehicles with a smart entry & start system).
• The shift lever is in R.
LC150_OM_OM60R93E_(GE)