Toyota LAND CRUISER PRADO Owner's Manual page 672

Hide thumbs Also See for LAND CRUISER PRADO:

Table of Contents

When registering ID codes (vehicles with the tire pressure warning sys-

Initialize the tire pressure warning system after ID code registration. Initial-

ization is disabled if the system was initialized before registration.

After ID code registration, the tires are hot by driving. Initialize the tire pres-

sure warning system after the tires become cold.

Canceling the change wheel set mode (vehicles with the tire pressure

warning system)

If turning the engine switch to the "LOCK" position (vehicles without a smart

entry & start system) or off (vehicles with a smart entry & start system) when

in the change wheel set mode before driving, the change wheel set mode is

After driving when in the change wheel set mode, the change wheel set

mode cannot be canceled. To cancel the mode, perform the procedure for

ID code registration again and turn the engine switch to the "LOCK" position

(vehicles without a smart entry & start system) or off (vehicles with a smart

entry & start system) before driving.

If the change wheel set mode is canceled, the ID codes that have already

been registered are communicated. When communication is finished, the

tire pressure warning light will turn off.

LC150_OM_OM60R93E_(GE)

7-3. Do-it-yourself maintenance