Toyota LAND CRUISER PRADO Owner's Manual page 237

236
3-3. Adjusting the seats
Recall procedure
■
Vehicles with an automatic transmission:
1
Check that the shift lever is in P.
Vehicles with a manual transmission:
Check that the parking brake is set.
Vehicles without a smart entry & start system:
2
Turn the engine switch to the "ON" position.
Vehicles with a smart entry & start system:
Turn the engine switch to IGNITION ON mode.
Press button "1" or "2" for the
3
driving position you want to
recall
sounds.
To stop the position recall operation part-way through
■
Perform any of the following:
● Press the "SET" button.
Press button "1" or "2".
●
● Operate any of the seat adjustment switches (only cancels seat position
recall).
Operate the tilt and telescopic steering control switch (only cancels steering
●
wheel position recall).
Seat positions that can be memorized (P. 217)
■
The adjusted positions other than the position adjusted by lumbar support
switch can be recorded.
Operating the driving position memory after turning the engine switch
■
off
Recorded seat positions can be activated up to 180 seconds after the driver's
door is opened and another 60 seconds after it is closed again.
In order to correctly use the driving position memory function
■
If a seat position is already in the furthest possible position and the seat is
operated in the same direction, the recorded position may be slightly different
when it is recalled.
LC150_OM_OM60R93E_(GE)
until the buzzer