Toyota LAND CRUISER PRADO Owner's Manual page 339

338
4-3. Operating the lights and wipers
Turning the high beam on/off manually
Switching to low beam
■
Pull the lever to the original posi-
tion.
The Automatic High Beam indica-
tor will turn off.
Push the lever away from you to
activate the Automatic High Beam
system again.
Switching to high beam
■
Press the Automatic High Beam
switch.
The Automatic High Beam indica-
tor will turn off and the high beam
indicator will turn on.
Press the switch to activate the
Automatic
again.
LC150_OM_OM60R93E_(GE)
High Beam system