Toyota LAND CRUISER PRADO Owner's Manual page 293

292
4-2. Driving procedures
 Manual transmission (gasoline engine)
Check that the parking brake is set.
1
Check that the shift lever is set in N.
2
Firmly depress the clutch pedal.
3
Turn the engine switch to the "START" position to start the engine.
4
 Manual transmission (diesel engine)
Check that the parking brake is set.
1
Check that the shift lever is set in N.
2
Firmly depress the clutch pedal.
3
Turn the engine switch to the "ON" position.
4
The
If the engine coolant temperature is above approximately 30°C (86°F), the
indicator may not turn on.
After the
5
engine switch to the "START" position to start the engine.
Changing the engine switch positions
"LOCK"
1
The steering wheel is locked and
the key can be removed. (Vehicles
with an automatic transmission:
The key can be removed only
when the shift lever is in P.)
"ACC"
2
Some electrical components such
as the audio system can be used.
"ON"
3
All electrical components can be
used.
"START"
4
For starting the engine.
LC150_OM_OM60R93E_(GE)
indicator turns on.
indicator light goes out or does not turn on, turn the